> Chapter 15 - IPv6 > IPv6 Configuration

IPv6 Configuration

This section contains configuration information for IPv6 on FortiOS. Attempts are made to include scenarios in each section to better assist with the configuration and to orient the information toward a particular task.

You will find information on the following:

IPv6 address groups

IPv6 address ranges

IPv6 firewall addresses

Blocking IPv6 packets by extension headers

IPv6 Denial of Service policies

Configure hosts in an SNMP v1/2c community to send queries or receive traps

IPv6 PIM sparse mode multicast routing

By default IPv6 configurations do not appear in the web-based manager. You need to enable the feature first.

To enable IPv6:

1. Go to System > Config > Features.
2. Select IPv6 and click Apply.